High light output, three sided solar pathway lights. With no expensive connection to mains power and zero operating costs, SolarPost 200 triangular posts with LED lights on all three sides provide the most economical, night long, high lumen light output of any similar solar bollard or pathway light.
Ideal for providing bright and reliable dusk to dawn lighting and enhancing both safety and security, along pathways and driveways in parks and gardens, housing estates, and private homes. For a more heavy duty bollard with a precisely focused light, see our SolarPost 100 Bollard Lights.
Trenching for electrical wires along a pathway can quickly become expensive. This cost can escalate rapidly if other challenges arise like rocky terrain.
Any trenching means disruption of the site, access restriction and the cost of subsequent ground remediation, vegetation replacement and landscaping works. With SolarPost 200 bollards, only individual footings need to be installed.
With less work in site preparation, electrical connections and site remediation, SolarPost 200 bollards can be installed in just a fraction of the time compared with mains powered bollards. Just 3 mounting bolts secure the posts to prepared footings.
With an area of 310 sq. in., the SolarPost 200 PV panels generate vastly more power than any other commercial or residential grade solar powered pathway lighting.
SolarPost 200 bollards can be set to operate either continuously for 12 hours at 50% brightness or alternatively for 6 hours at full brightness.
SolarPost enclosures are rated as IP66 according to international standard EN 60529 - "dust tight" and protected against heavy seas or powerful jets of water.
Photovoltaic cells are sealed behind UV stabilized tempered glass.
The large PV panels on all three sides of the triangular column optimize power generation.
Strip lights extend from top to bottom of all three corners of the post, for a full 360° light distribution.
|Power:||21W (3 x 7W panels)|
|Construction:||PV cells sealed behind UV stabilized tempered glass.|
|Total area:||310 sq. in.|
|Cap and lid:||Die-cast aluminum|
|Post and chassis:||Extruded aluminum|
|Finish:||Standard powder coated finish - RAL 7001 silver grey.|
|IP rating:||66 (ingress protection)|
|Lifetime:||5-7 years at 68°F|
|Operating temp.:||-13°F to +150°F|
|Max. current:||Custom set brightness levels|
|Max LED power:||6 or 12 hours|